Home > Knowledge > Content
Cautions for Recycling, Reuse and Maintenance of Plastic Pallets
- Nov 29, 2018 -

The tray recycling said that the plastic tray should pay attention to a few points when using:


The plastic tray should be lightly placed to avoid uneven force and damage when landing.


When placing the goods, they should be placed evenly, so as to avoid sideslip when lifting and transporting.


When using the handling equipment, we should consider whether the difference size is suitable for the use of this plastic pallet, so as to avoid inappropriate size and brace the plastic pallet.


When stacking, the load-bearing capacity of the lowest pallet should be considered.


Correct use of plastic pallets should make packaging combination codes placed on plastic pallets with appropriate binding and wrapping, facilitate the use of mechanical loading and unloading and transportation, so as to meet the requirements of loading and unloading, transportation and storage. In order to make the plastic tray safe and long-term use, we hope to use the plastic tray correctly according to the following requirements:


Plastic pallets should avoid exposure to sunlight, so as not to cause aging and shorten service life.


It is strictly forbidden to throw goods from high places into plastic pallets. Reasonable determination of the way goods are stacked in pallets. Goods should be placed evenly, not centrally or eccentrically. Pallets carrying heavy loads should be placed on flat ground or on the surface of objects.


It is strictly forbidden to throw plastic pallets from high places to avoid crushing and cracking of pallets caused by violent impact.



When a forklift truck or a manual hydraulic truck is working, the fork bars should rest on the outside of the fork holes of the pallet as far as possible. The fork bars should all extend into the pallet, and the pallet can be lifted smoothly before the angle can be changed. The fork should not impact the side of the tray to avoid breaking and cracking of the tray.


When pallets are on the shelf, they must adopt shelf-type pallets. The carrying capacity depends on the shelf structure, and overloading is strictly prohibited.